Data Center | Premix Group

Materials by application

PRE-ELEC^® materials — extrusion process

FIBC — materials for monofilaments, tapes and films, big bag applications

These are PRE-ELEC^® materials suitable for electrically conductive films and filaments in FIBC bigbags.
More information on the Film and Filament applications

Polymer Base	Product	Compound	Concentrate	Description	Special Features
PE	PE 1271	●		Conductive PE-LD/PE-LLD based compound for liner films (FIBC type C)	• High conductivity, excellent dispersion • Blowing ratio more than 2:1
PE	PE 17840		●	Multipurpose conductive PE-LLD based concentrate for monofilaments (with PP), liner films (with PE-LD) and yarn tapes (FIBC type C)Multipurpose conductive PE-LLD based concentrate for monofilaments (with PP), liner films (with PE-LD) and yarn tapes (FIBC type C)	• High conductivity, good dispersion • Dilution up to 40% with commodity PP or up to 50% with non-conductive film PE-LD • Flexibility to modify properties by different dilution ratios and specific polymers • Easy to strech up to 5:1 , blowing ratio more than 2:1 • Cost effective solution, excellent quality-price ratio
PP	PP 1353		●	Conductive PP concentrate for monofilaments and raffia tapes (FIBC type C)	• High conductivity, good dispersion • Dilution up to 50% with commodity PP • Easy to strech up to 5:1

Check out also the Grade Selection List (link on the right side of this page).

Liner films

PRE-ELEC^® PE 1271 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 17840 — Technical data sheet — Material safety data sheet

Monofilaments and tapes

PRE-ELEC^® PE 17840 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 1353 — Technical data sheet — Material safety data sheet

Film applications

These are PRE-ELEC^® materials suitable for electrically conductive film applications.
More information on the film application.

Polymer Base	Product	Applications	Special Features
PE-LD/LLD	PE 1271	Film and extrusion applications	High conductivity compound with excellent dispersion
PE-LLD	PE 17840	Film and extrusion applications	Multipurpose concentrate with high conductivity and good dispersion.
PE-LD	PE 18381	Film and extrusion applications	Conductive compound with excellent combination of processability, low resistivity and mechanical properties.
PP-H	PP 16156	Film and extrusion applications	High conductivity/purity compound with excellent processability.
TPU ether	TPU 18025	Wearables, sensors	Highly conductive compound for cast film, also injection molded.

Check out also the Grade Selection List (link on the right side of this page).

PRE-ELEC^® PE 1271 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 17840 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 18381 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 16156 — Technical data sheet — Material safety data sheet
PRE-ELEC^® TPU 18025 — Technical data sheet — Material safety data sheet

Flexible tube, hose, and profile applications

These are PRE-ELEC^® materials suitable for electrically conductive flexible tubes, hoses, and profiles.
More information on the flexible applications.

Comparison table (click to open):

Polymer Base	Product	Applications	Modulus*	Special Features
PE-LLD	PE 12841	Flexible tubes	FM400	Hardest olefin-based
POE	PE 17693	Flexible tubes	FM300	Medium soft. Allows slight dilution
POE	PE 18480	Flexible tubes	FM200	Softest olefin-based, available within EU
TPE-S	TPE 1502	Profiles	TM10	Gaskets, gripsurfaces, our softest conductive, Shore A 65
TPE-S	TPE 18416	Profiles	TM100	Safety edges, very high conductivity required by sensor profiles, Shore A 85
TPU ester	TPU 1512	Profiles	TM35	Abrasion resistant, High conductivity, good mechanicals
TPU ester	TPU 18438	Flexible tubes	TM25	Abrasion resistant, Medium conductivity, excellent mechanicals
TPU ester	TPU 18600	Flexible tubes	TM15	Abrasion resistant, High conductivity, good mechanicals
TPU ether	TPU 16619	Profiles	TM50	Abrasion resistant, High conductivity, good mechanicals

* Modulus = Flexural modulus (FM) / Tensile modulus (TM,)

Check out also the Grade Selection List (link on the right side of this page).

Sheet applications

These are PRE-ELEC^® materials suitable for electrically conductive sheet applications.
More information on the sheet application.

Comparison table (click to open):

Polymer Base	Product	Sheet applications	Compound	Concentrate	Special Features
PC/ABS	PC/ABS 1420	Thermoformed trays	●		High stiffness
PE-HD	PE 1250	Sheets for electronics packaging, canisters		●	Impact modified economical grade
PE-HD	PE 1291	Sheets and pipes	●		Mono- and coextrusion
PE-HD	PE 1292	Sheets for electronics packaging, canisters	●		Excellent mechanical strength
PE-HD	PE 1296	Sheets for chemical handling installations (ATEX zones),welded chemical tanks out of sheets		●	Excellent mechanical strength
PE-LLD	PE 17840	EPA area furniture elements		●	Dilution with ABS (+SBS), PP, PE
PE-HD	PE 18594	Sheets for electronics packaging, canisters		●	Economical grade with good dispersion
PP	PP 1393	Corrugated boards		●	Easy processability
PP	PP 1397	Corrugated boards	●		Easy processing, excellent dispersion
PP	PP 15392	Corrugated boards		●	Challenging to homogenize,but more affordable
PP	PP 18900	Corrugated boards		●	Partial replacement to PP 1393
PP	TP 14815	Ventilations pipes, ATEX sheets	●		Flame retardant (V0)
PS	TP 15837	Sheets, thermoformed trays		●	Can be dilution with natural or recycled polystyrene
TPU-Es	TPU 1512	EPA area	●		Co-ex with ABS
TPU-Et	TPU 18025	Cast film, flexible sheets	●		High conductivity, suitable for sensors

Check out also the Grade Selection List (link on the right side of this page).

Cable applications

These are PRE-ELEC^® materials suitable for electrically conductive layers in cables.
More information on the cable application.

Comparison table (click to open):

Polymer Base	Product	SR, Ω	VR, Ωcm	Special features
PE-LLD	PE 12841	7E+02	19	Flexible, good low T resistanceWide operation temperatures, excellent mechanical properties, easy to paint
PE-LD	PE 18381	-	13.5	Flexible PE-compound, good processability and low resistivity
PE adhesive	PE 18500	9E+02	18	Conductive adhesive compound, good adhesion to Cu and Al
PE-HD	PE 18664	7E+02	29	Conductive HDPE jacket. Performance/cost optimized, good ESCR* performance
PP	PP 1397	2E+03	80	Conductive compound for T3 automotive applications
PP	PP 18220	-	63	Medium voltage PP-conductor & insulation screen. High flexibility, excellent low T resistance
TPE	TPE 1502	< 1E+03	< 1E+02	Excellent mechanical properties of the elastomer
SEBS	TPE 18416	4E+02	3.5	Excellent balance of mechanical properties and easy to extrude
TPU-Es	TPU 1512	< 1E+04		Excellent mechanical properties of the base elastomer
TPU-Es	TPU 18025	< 5E+02	< 10	Excellent mechanical properties of the base elastomer
TPU-Es	TPU 18600	6E+04	41	Excellent mechanical properties of the base elastomer

Check out also the Grade Selection List (link on the right side of this page).

Cables

PRE-ELEC^® PE 12841 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 18381 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 18500 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 18664 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 1397 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 18220 — Technical data sheet — Material safety data sheet

Flexible Cables

PRE-ELEC^® TPE 1502 — Technical data sheet — Material safety data sheet
PRE-ELEC^® TPE 18416 — Technical data sheet — Material safety data sheet
PRE-ELEC^® TPU 1512 — Technical data sheet — Material safety data sheet
PRE-ELEC^® TPU 18025 — Technical data sheet — Material safety data sheet
PRE-ELEC^® TPU 18600 — Technical data sheet — Material safety data sheet

Pipe applications

These are PRE-ELEC^® materials suitable for electrically conductive pipes:

PRE-ELEC^® PE 1250   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 1291   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 1292   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 1296   — Technical data sheet — Material safety data sheet

Check out also the Grade Selection List (link on the right side of this page).

Foam applications

PRE-ELEC^® materials — injection molding process

Boxes & pallet applications

Materials suitable for boxes and pallets:

PRE-ELEC^® PE 18594 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 1370 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 1375 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 1392 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 18999 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 19136 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PP 19161 — Technical data sheet — Material safety data sheet

Check out also the Grade Selection List (link on the right side of this page).

Technical parts applications

Materials suitable for injection molded technical parts:

Check out also the Grade Selection List (link on the right side of this page).

Fuel system applications

PRE-ELEC^® materials — blow molding process

Cans and bins applications

Materials available for cans and bins:

PRE-ELEC^® PE 1291   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 1296   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 1312   — Technical data sheet — Material safety data sheet
PRE-ELEC^® PE 18594 — Technical data sheet — Material safety data sheet
PRE-ELEC^® PS 1328 — Technical data sheet — Material safety data sheet

Check out also the Grade Selection List (link on the right side of this page).

Machinery purging materials

PRE-PRG^™ for Plastic Processing

PRE-PRG^™ for Powder Paint

Materials by plastic type

PRE-ELEC^® materials — by plastic type

PE | Polyethlene materials

PRE-ELEC^® polyethylene (PE) materials:

Check out also the Grade Selection List (link on the right side of this page).

PP | Polypropylene materials

PRE-ELEC^® polypropylene (PP) materials:

Check out also the Grade Selection List (link on the right side of this page).

PS | Polystyrene materials

Other thermoplastics

Other PRE-ELEC^® thermoplastics:

Check out also the Grade Selection List (link on the right side of this page).

Elastomers

PRE-ELEC^® elastomers:

Check out also the Grade Selection List (link on the right side of this page).

PRE-ELEC^® materials — available as concentrates

Concentrates — materials available as concentrates

These are PRE-ELEC^® materials available as concentrates.
More information on our concentrates.

Comparison table:

Polymer Base	Product	Applications	Extrusion	Injection molding	Surface finish	Special features
PA-6	PA 1411	General grade	++	++	+++	Wide operation temperatures, excellent mechanical properties, easy to paint
PE-HD	PE 1296	Drums, canisters, pipes, sheet	+++	++	+++	Excellent mechanical properties
PE-HD	PE 1250	Pipes, profiles, sheets	++	++	++	Economical version of PE 1296
PE-HD	PE 18594	Thermoformed trays, coextrusion sheets	++	++	++	Economical HDPE
PE-LLD	PE 17693	Flexible tubes and hoses	+++	-	+++	Flexible and resilient, good fatigue behaviour
PE-LLD	PE 17840	Films, sheets, filaments	+++	-	++	Can be diluted with PP, PE, ABS (incl SBS). Economical
PP	PP 1353	Monofilament for big bags type C	++	++	++	Good stretchability
PP	PP 1393	Corrugated board	+++	++	+++	High flexibility and resilience, easy processability
PP	PP 15392	Corrugated board	++	++	++	High flexibility and resilience
PP	PP 18900	Corrugated boards	++	++	++	Alternative version of PP 1393
PP	PP 18999	Pallets, boxes	-	+++	+	High flowability, economical, impact modified
PP	TP 15837	Sheets, thermoformed trays	+++	+	+++	Economical, can be dilution with natural or recycled polystyrene

Check out also the Grade Selection List (link on the right side of this page).

Premix Data Center

Materials by application

PRE-ELEC^® materials — extrusion process

Liner films

Monofilaments and tapes

Cables

Flexible Cables

PRE-ELEC^® materials — injection molding process

PRE-ELEC^® materials — blow molding process

Machinery purging materials

Materials by plastic type

PRE-ELEC^® materials — by plastic type

PRE-ELEC^® materials — available as concentrates

Certificates

PRE-ELEC^®
Grade Selection List 2022

New products

Product Brochures

Didn't find what you were looking for?

Other guidance

联系我们

Premix Data Center

Materials by application

PRE-ELEC® materials — extrusion process

PRE-ELEC® materials — injection molding process

PRE-ELEC® materials — blow molding process

Machinery purging materials

Materials by plastic type

PRE-ELEC® materials — by plastic type

PRE-ELEC® materials — available as concentrates

Certificates

PRE-ELEC® Grade Selection List 2022

New products

Product Brochures

Didn't find what you were looking for?

Other guidance

联系我们

PRE-ELEC^® materials — extrusion process

PRE-ELEC^® materials — injection molding process

PRE-ELEC^® materials — blow molding process

PRE-ELEC^® materials — by plastic type

PRE-ELEC^® materials — available as concentrates

PRE-ELEC^®
Grade Selection List 2022